Today you build 5 min
Hi! It is AdvasBot.
Today we build a robot with legs!
This is the Walking Bot. It has no wheels.
It has legs. Step, step, step!
Today you build it. Then you make it walk.
Where do we see it? 5 min

Look at this big machine. It walks!
The wind pushes it. Its legs go step, step.
Cars have wheels. Animals have legs.
Legs can walk on sand and bumpy ground.
Building tips in the build
- Look at one picture at a time.
- Count the holes on each beam.
- Build the legs the same on both sides.
- Turn the legs by hand. Do they move freely?
- Stuck? That is OK. Ask your teacher.
Robot walk break! 5 min
Stand up. Be a walking robot!
- Walk on the spot. Stiff legs, like a robot.
- Walk very slowly. Step… step… step.
- Now walk fast!
- Walk backwards. Careful!
- Freeze! Sit down. Well done!
Meet the parts 5 min
You know the Brick and the cable. Look at the motor.
- The big motorIt is long. It is strong. It moves the legs.
- The small motorIt is small. It is not as strong.
- The legsThe motor turns. The legs take steps.
A robot with legs is heavy. It needs the big motor.
Plug it in 5 min
- Find port A. It is a letter.
- Plug the motor cable in. Click!
- Pull it a tiny bit. Does it stay?
Talk to the Brick 5 min
- Press the middle button. The Brick turns on.
- Wait for the screen.
- Your teacher joins it to the computer.
- Look at the computer. Is there a motor on A?
For grown-ups: how to connectUSB or Bluetooth, and what to do when it will not connect.Show meHide
Two routes, and either is fine. USB is the reliable one and the one to fall back on when a room’s Bluetooth is busy; Bluetooth leaves the robot free to move, which some models need.
How to connect the BrickUSB and Bluetooth, step by step, with a photograph of every screen. Open it if you have not done this before — or if pairing is not working.Show meHide
USB — the reliable one
- Switch the Brick on with the dark grey centre button.
- Cable into the Brick’s PC port — the small square socket beside the numbered ports, not one of the numbered ones.
- Other end into the computer.
Bluetooth — name it first
Do these in order. Naming the Brick after you go looking for it in the list is how groups end up driving each other’s robots.
- Name your Brick. On the Brick: Settings (the spanner) → Brick Name. Type something nobody else will pick, then press the tick. Every Brick is called
EV3until somebody changes it. - Turn Bluetooth on. Settings → Bluetooth. Tick Bluetooth and Visibility. Leave iPhone/iPad/iPod unticked.
- Connect from EV3 Classroom. Click the Brick icon at the top of the programming area, find your Brick by name, and click Connect.
- Say yes on the Brick. It asks “Connect?” with the computer’s name — choose the tick, then accept the passkey, which is already 1234.
EV3.The two failures, every class, every time. The Brick has gone to sleep while you were building — press the centre button to wake it. Or you have paired with the group at the next table, which is why the name matters.
The long version, including Port View and how to read the port tiles, is in the Brick & Bluetooth guide.
Make it walk! 15 min
You know this block. Give it a big number!
when program starts :: events hat [A v] run [clockwise v] for (6) [rotations v] :: motors
- Put your robot on the floor. Give it room.
- Drag a motor block under the start block.
- Check the letter. It must say A.
- Type 6 in the number.
- Press play. Watch it walk!
Your challenges 10 min
⭐ Challenge 1: Walk back
Make it walk back to the start. Which way?
⭐⭐ Challenge 2: A little walk
Make it walk only a little. What number?
⭐⭐⭐ Challenge 3: To the line
Your teacher puts tape on the floor. Make your robot stop on the line.
Tidy up 5 min
- Turn the Brick off.
- Keep your Walking Bot in one piece. You need it next time!
- Put spare parts back in the box.
Well done! Your robot can walk!
Teacher note
Timing (90 min): photo and talk 5, real world 5, build 35, break 5, parts 5, ports 5, connect 5, first walk 15, challenges 10, tidy 5. The legs are the hard part of the build: check both sides match before the motor goes on.
One Large Motor on port A (step 10 of the manual). On the Level 1 build, clockwise walks it forward. If a child’s robot walks backwards, the motor is probably mounted the other way round; changing the direction on the block is the fix for today.
The new idea is only that motors come in two sizes. The big one is strong, the small one is quicker; a legged robot carries its own weight, so it needs the strong one. Do not use the words “torque” or “stall”.
Challenge 3: put a strip of tape about one robot-walk away. The children find the number by trying; any number that stops it on the line is right. Clear a walking space on the floor; a walker that reaches the table edge will go over it.
Words met today: big motor, small motor, legs.
