Today you build 5 min
Hi! It is AdvasBot.
Today we build a clock. Tick, tock!
This is the Ticking Clock.
A heavy weight hangs down. It swings.
The motor gives it little pushes.
Where do we see it? 5 min

Old clocks have a weight that swings.
It is called a pendulum.
It means a weight that swings.
Each swing goes tick. Then tock!
Building tips in the build
- Look at one picture at a time.
- Build the frame tall and straight.
- Look for rubber bands in the pictures. You need two!
- Push the pendulum. Does it swing freely?
- Stuck? That is OK. Ask your teacher.
Pendulum break! 5 min
Stand up. Be a pendulum!
- Put your hands together. Point them down.
- Swing them this way. Tick!
- Swing them that way. Tock!
- Go slowly. Tick… tock… tick… tock.
- Stop. Sit down. Well done!
Meet the parts 5 min
- The small motorIt gives the little pushes.
- The pendulumA heavy weight. It swings to and fro.
- The rubber bandsThey hold the parts. They stretch.
This is the small motor. A push only needs a small motor.
Plug it in 5 min
- Find port A.
- Plug the motor cable in. Click!
- Keep the cable away from the pendulum.
Talk to the Brick 5 min
- Turn the Brick on.
- Your teacher joins it to the computer.
- Is there a motor on A?
For grown-ups: how to connectUSB or Bluetooth, and what to do when it will not connect.Show meHide
Two routes, and either is fine. USB is the reliable one and the one to fall back on when a room’s Bluetooth is busy; Bluetooth leaves the robot free to move, which some models need.
How to connect the BrickUSB and Bluetooth, step by step, with a photograph of every screen. Open it if you have not done this before — or if pairing is not working.Show meHide
USB — the reliable one
- Switch the Brick on with the dark grey centre button.
- Cable into the Brick’s PC port — the small square socket beside the numbered ports, not one of the numbered ones.
- Other end into the computer.
Bluetooth — name it first
Do these in order. Naming the Brick after you go looking for it in the list is how groups end up driving each other’s robots.
- Name your Brick. On the Brick: Settings (the spanner) → Brick Name. Type something nobody else will pick, then press the tick. Every Brick is called
EV3until somebody changes it. - Turn Bluetooth on. Settings → Bluetooth. Tick Bluetooth and Visibility. Leave iPhone/iPad/iPod unticked.
- Connect from EV3 Classroom. Click the Brick icon at the top of the programming area, find your Brick by name, and click Connect.
- Say yes on the Brick. It asks “Connect?” with the computer’s name — choose the tick, then accept the passkey, which is already 1234.
EV3.The two failures, every class, every time. The Brick has gone to sleep while you were building — press the centre button to wake it. Or you have paired with the group at the next table, which is why the name matters.
The long version, including Port View and how to read the port tiles, is in the Brick & Bluetooth guide.
One little push 15 min
A push is tiny. So the number is tiny!
when program starts :: events hat [A v] set speed to (25) % :: motors [A v] run [clockwise v] for (0.1) [rotations v] :: motors [A v] run [counterclockwise v] for (0.1) [rotations v] :: motors
- Put set speed under the start block. Type 25.
- Add a motor block. Type 0.1. That is a tiny turn.
- Add one more. Pick counterclockwise. Type 0.1.
- Hold the pendulum still. Let go.
- Press play. Watch the pendulum!
Your challenges 10 min
⭐ Challenge 1: Count the swings
Press play. Count the swings until it stops.
⭐⭐ Challenge 2: Two pushes
Add two more blocks. Now it pushes twice.
⭐⭐⭐ Challenge 3: A bigger push
Change both numbers to 0.2. Do you count more swings?
Tidy up 5 min
- Turn the Brick off.
- Keep your clock in one piece. You need it next time!
- Put spare parts back in the box.
Well done! Your clock can tick!
Teacher note
Timing (90 min): photo and talk 5, real world 5, build 35, break 5, parts 5, ports 5, connect 5, one push 15, challenges 10, tidy 5.
One Medium Motor on port A (step 9 of the manual). Step 6 ties two rubber bands across the drive; children miss them, so check every model for both bands before the program section.
The push: Level 1 uses 25 degrees. Junior has no degrees, so the page uses 0.1 rotations (about 36 degrees) at 25 % speed, then the same back. If that knocks the pendulum rather than nudging it, use 0.05. Show the children where the decimal point goes; few of them will have typed one before.
One push, then the pendulum slows and stops by itself. That is fine today, and it sets up lesson 18, where a stack of pushes keeps it going.
Words met today: pendulum, swing, push, rubber band.
