Today you build 5 min
Hello! Do you like fair rides?
Today we build one with four chairs!
The top spins round. The chairs fly round too.
Wheee! Hold on tight!
Where do we see it? 5 min

This ride is at a fair. People sit in the chairs.
The top spins. The chairs swing out wide.
Faster and faster! Then slow. Then stop.
Building tips in the build
- There are four chairs. Build them all the same.
- Count the chairs at the end. Four?
- Push each part in hard. Click!
- Turn the top gently by hand. Does it spin?
- Stuck? That is OK. Ask a friend first. Then ask your teacher.
Fair ride break! 5 min
Find a space. You are on the ride!
- Sit in your chair. Hold on!
- Stand up. Turn round slowly.
- Turn a bit faster. Arms out!
- Slow down. Slow down. Stop.
- Wobble back to your seat!
Which motor? 5 min
- The big motorIt is long. It is strong.
- The small motorIt is short. It is quick.
Plug it in 5 min
- Find the motor cable.
- Plug it into port A. Click!
- Pull it a tiny bit. Does it stay in?
- Turn the Brick on.
Make it spin! 15 min
when program starts :: events hat [A v] set speed to (30) % :: motors [A v] run [clockwise v] for (5) [seconds v] :: motors
- Put a speed block under the start block.
- Type 30. A gentle speed.
- Put a motor block under it. Pick seconds.
- Type 5. Check the letter is A.
- Press play. Watch the chairs!
Your challenges 10 min
⭐ Challenge 1: A longer ride
Make the ride spin for 10 seconds.
⭐⭐ Challenge 2: The other way
Pick counterclockwise. Which way do the chairs go?
⭐⭐⭐ Challenge 3: Do the chairs fly out?
Try speed 20. Then try speed 60. Watch the chairs. What changes?
Tidy up 5 min
- Turn the Brick off.
- Keep your ride in one piece. You need it next time!
- Put spare parts back in the box.
Well done! The fair is open!
Teacher note
Timing (90 min): photo and talk 5, real world 5, build 35, break 5, which motor 5, plug in 5, first spin 15, challenges 10, tidy 5.
Check the port and the speed before class. The Flying Chair X4 has one Medium Motor, but no page we have names its port. Build one model and look at the port view. If the motor is not on A, tell the class which letter to use. Run 30% and 60% on the built model: if 60% throws the chairs about or shakes the model, change challenge 3 to 20 and 40.
The program starts at a gentle speed on purpose: a spinning model at full speed can shake itself apart. Keep fingers clear.
