Today you build 5 min
Hi! Vroom, vroom!
Today we build a fast robot!
The Speed Bot has wheels. It drives!
It has two motors. One for each side.
You will drive it away. Then bring it back.
Where do we see it? 5 min

A racing car goes very fast.
It goes round and round a track.
Then it comes back to the start.
Building tips in the build
- Look at one picture at a time.
- Find the parts in the picture.
- Push the parts together. Click!
- Spin each wheel. Does it turn freely?
- Stuck? That is OK. Ask your teacher.
Race car break! 5 min
Stand up. Be a race car!
- Hold a pretend steering wheel.
- Run on the spot. Slow!
- Now faster. Faster!
- Brakes on. Stop!
- Sit down. Well done, drivers!
Meet the parts 5 min
- The BrickIt is the brain. It tells the wheels what to do.
- Two big motorsOne motor for each wheel.
- Two cablesOne cable for each motor.
Plug it in 5 min
Two motors go in B and C. Just like the frog!
- Sit behind the robot. Look the way it drives.
- The left motor goes in B.
- The right motor goes in C.
- Keep cables away from the wheels.
Talk to the Brick 5 min
The computer talks to the Brick. Your teacher will help.
- Press the middle button. The Brick turns on.
- Wait for the screen.
- Your teacher joins the Brick to the computer.
- Look at the computer. Is there a motor on B? On C?
For grown-ups: how to connectUSB or Bluetooth, and what to do when it will not connect.Show meHide
Two routes, and either is fine. USB is the reliable one and the one to fall back on when a room’s Bluetooth is busy; Bluetooth leaves the robot free to move, which some models need.
How to connect the BrickUSB and Bluetooth, step by step, with a photograph of every screen. Open it if you have not done this before — or if pairing is not working.Show meHide
USB — the reliable one
- Switch the Brick on with the dark grey centre button.
- Cable into the Brick’s PC port — the small square socket beside the numbered ports, not one of the numbered ones.
- Other end into the computer.
Bluetooth — name it first
Do these in order. Naming the Brick after you go looking for it in the list is how groups end up driving each other’s robots.
- Name your Brick. On the Brick: Settings (the spanner) → Brick Name. Type something nobody else will pick, then press the tick. Every Brick is called
EV3until somebody changes it. - Turn Bluetooth on. Settings → Bluetooth. Tick Bluetooth and Visibility. Leave iPhone/iPad/iPod unticked.
- Connect from EV3 Classroom. Click the Brick icon at the top of the programming area, find your Brick by name, and click Connect.
- Say yes on the Brick. It asks “Connect?” with the computer’s name — choose the tick, then accept the passkey, which is already 1234.
EV3.The two failures, every class, every time. The Brick has gone to sleep while you were building — press the centre button to wake it. Or you have paired with the group at the next table, which is why the name matters.
The long version, including Port View and how to read the port tiles, is in the Brick & Bluetooth guide.
Drive it! 15 min
Put the robot on the floor. Give it room!
when program starts :: events hat set movement motors to [B v] and [C v] :: movement move for (2) [rotations v] at (50) (50) % speed :: movement move [backward v] for (2) [rotations v] :: movement
- Find the start block.
- Add set movement motors. Check B and C.
- Add the move tank block. Type 2, then 50 and 50.
- Add a move backward block. Type 2.
- Press play. Watch it go!
Both numbers are 2. So it comes back home.
Your challenges 5 min
⭐ Challenge 1: Go further
Change both 2s to 3. Does it still come home?
⭐⭐ Challenge 2: Park it
Put a book on the floor. Drive to it. Stop before you hit it!
⭐⭐⭐ Challenge 3: There and back twice
Make it go away and back two times.
Tidy up 5 min
- Turn the Brick off.
- Keep your Speed Bot in one piece. You need it next time!
- Put spare parts back in the box.
Well done! Your robot drives!
Teacher note
Timing (90 min): model and talk 5, real world 5, build 35, break 5, parts 5, ports 5, connect 5, first drive 15, challenges 5, tidy 5.
The model, photo and manual are the Level 2 Speed Bot (EV3-L02-22): a driving base with two Large Motors, left on B and right on C, seen from behind. Clear floor space before the program section; a robot that drives off a table is the most common accident with wheeled models at this age.
The program uses the move tank block from lesson 36 (equal speeds, so straight) and comes back with the plain move backward block, so nobody types a minus number. Same rotations out and back brings the robot roughly home; small differences are normal, and worth noticing out loud.
If it curves, check the two speed numbers first, then the cables, then that nothing rubs a wheel.
Words met today: wheel, forward, backward, drive.
