Today you build 5 min
Hi! Waddle, waddle!
Today we build the Toddle Bot!
The Toddle Bot has no wheels. It has no legs!
It rocks this way. Then that way.
Each rock moves it a little. It waddles!
Where do we see it? 5 min

Penguins have short legs.
They cannot take big steps.
So they rock from side to side. Waddle, waddle!
Building tips in the build
- Look at one picture at a time.
- Find the parts in the picture.
- Push the parts together. Click!
- The two motors are joined. That is right!
- Stuck? That is OK. Ask your teacher.
Penguin break! 5 min
Stand up. Be a penguin!
- Put your arms down by your sides.
- Keep your feet close together.
- Rock left. Rock right.
- Waddle across the room. Waddle back!
- Sit down. Well done, penguins!
Meet the parts 5 min
- The BrickIt is the brain. It is heavy too.
- Two big motorsThey rock the robot. They are joined together.
- Two cablesOne cable for each motor.
Plug it in 5 min
Two motors. They go in B and C.
- Plug one motor into B.
- Plug the other motor into C.
- Pull each cable a tiny bit. Does it stay?
Talk to the Brick 5 min
The computer talks to the Brick. Your teacher will help.
- Press the middle button. The Brick turns on.
- Wait for the screen.
- Your teacher joins the Brick to the computer.
- Look at the computer. Is there a motor on B? On C?
For grown-ups: how to connectUSB or Bluetooth, and what to do when it will not connect.Show meHide
Two routes, and either is fine. USB is the reliable one and the one to fall back on when a room’s Bluetooth is busy; Bluetooth leaves the robot free to move, which some models need.
How to connect the BrickUSB and Bluetooth, step by step, with a photograph of every screen. Open it if you have not done this before — or if pairing is not working.Show meHide
USB — the reliable one
- Switch the Brick on with the dark grey centre button.
- Cable into the Brick’s PC port — the small square socket beside the numbered ports, not one of the numbered ones.
- Other end into the computer.
Bluetooth — name it first
Do these in order. Naming the Brick after you go looking for it in the list is how groups end up driving each other’s robots.
- Name your Brick. On the Brick: Settings (the spanner) → Brick Name. Type something nobody else will pick, then press the tick. Every Brick is called
EV3until somebody changes it. - Turn Bluetooth on. Settings → Bluetooth. Tick Bluetooth and Visibility. Leave iPhone/iPad/iPod unticked.
- Connect from EV3 Classroom. Click the Brick icon at the top of the programming area, find your Brick by name, and click Connect.
- Say yes on the Brick. It asks “Connect?” with the computer’s name — choose the tick, then accept the passkey, which is already 1234.
EV3.The two failures, every class, every time. The Brick has gone to sleep while you were building — press the centre button to wake it. Or you have paired with the group at the next table, which is why the name matters.
The long version, including Port View and how to read the port tiles, is in the Brick & Bluetooth guide.
Make it waddle! 15 min
The two motors are joined. They must not fight.
So we use the plain move block. It moves both together.
when program starts :: events hat set movement motors to [B v] and [C v] :: movement set movement speed to (40) % :: movement move [forward v] for (5) [rotations v] :: movement
- Put the robot on a flat table. Not near the edge!
- Find the start block.
- Add set movement motors. Check B and C.
- Add set movement speed. Type 40.
- Add a move forward block. Type 5.
- Press play. Watch it waddle!
Your challenges 5 min
⭐ Challenge 1: Count the rocks
Press play. Count each rock out loud. How many?
⭐⭐ Challenge 2: Waddle back
Add a move backward block. Can it waddle home?
⭐⭐⭐ Challenge 3: Penguin parade
Line up the robots. Press play together. A penguin parade!
Tidy up 5 min
- Turn the Brick off.
- Keep your Toddle Bot in one piece. You need it next time!
- Put spare parts back in the box.
Well done! Your robot waddles!
Teacher note
Timing (90 min): model and talk 5, real world 5, build 35, break 5, parts 5, ports 5, connect 5, first walk 15, challenges 5, tidy 5.
Safety first: the two Large Motors are joined by one axle (verified against the manual on the Level 1 page, EV3-L01-25). If they are told to turn different ways or at different speeds, they fight and can break the model. The plain move forward/backward block cannot do that, which is why it is the only block today. Never put two separate motor blocks, or different tank numbers, on this model.
Walk it on a flat, hard table at 40%. On carpet it grips on one side and goes nowhere. Keep it away from table edges.
A grinding or clicking sound means the motors are fighting. Stop the program, and check both cables are in B and C.
Words met today: waddle, rock, joined.
