Today you build 5 min
Hi! Beep beep!
Today we build the Driving Base!
The Driving Base has two big wheels.
Each wheel has its own motor.
A little back wheel stops it tipping.
Lots of robots sit on top of it!
Where do we see it? 5 min

This is an electric wheelchair.
It has two big wheels. Each has a motor.
It has no steering wheel!
The motors make it go and turn.
Building tips in the build
- Look at one picture at a time.
- Find the parts in the picture.
- Push the parts together. Click!
- Spin each big wheel. Does it turn freely?
- Check the little wheel at the back. Does it spin?
- Stuck? That is OK. Ask your teacher.
Wheel break! 5 min
Stand up. Your arms are wheels!
- Roll your arms forward. Round and round.
- Roll them backward.
- Roll just one arm. Then the other.
- Roll both fast. Then stop!
- Sit down. Well done!
Meet the parts 5 min
- The BrickIt is the brain. It sits on top.
- Two big motorsOne motor for each big wheel.
- Two cablesOne cable for each motor.
Plug it in 5 min
You know this! Left in B. Right in C.
- Sit behind the robot. Look the way it drives.
- The left wheel motor goes in B.
- The right wheel motor goes in C.
- Keep cables away from the wheels.
Talk to the Brick 5 min
The computer talks to the Brick. Your teacher will help.
- Press the middle button. The Brick turns on.
- Wait for the screen.
- Your teacher joins the Brick to the computer.
- Look at the computer. Is there a motor on B? On C?
For grown-ups: how to connectUSB or Bluetooth, and what to do when it will not connect.Show meHide
Two routes, and either is fine. USB is the reliable one and the one to fall back on when a room’s Bluetooth is busy; Bluetooth leaves the robot free to move, which some models need.
How to connect the BrickUSB and Bluetooth, step by step, with a photograph of every screen. Open it if you have not done this before — or if pairing is not working.Show meHide
USB — the reliable one
- Switch the Brick on with the dark grey centre button.
- Cable into the Brick’s PC port — the small square socket beside the numbered ports, not one of the numbered ones.
- Other end into the computer.
Bluetooth — name it first
Do these in order. Naming the Brick after you go looking for it in the list is how groups end up driving each other’s robots.
- Name your Brick. On the Brick: Settings (the spanner) → Brick Name. Type something nobody else will pick, then press the tick. Every Brick is called
EV3until somebody changes it. - Turn Bluetooth on. Settings → Bluetooth. Tick Bluetooth and Visibility. Leave iPhone/iPad/iPod unticked.
- Connect from EV3 Classroom. Click the Brick icon at the top of the programming area, find your Brick by name, and click Connect.
- Say yes on the Brick. It asks “Connect?” with the computer’s name — choose the tick, then accept the passkey, which is already 1234.
EV3.The two failures, every class, every time. The Brick has gone to sleep while you were building — press the centre button to wake it. Or you have paired with the group at the next table, which is why the name matters.
The long version, including Port View and how to read the port tiles, is in the Brick & Bluetooth guide.
Drive straight! 15 min
Here is a new move block. It has a steering part.
Steering means which way the robot points.
when program starts :: events hat set movement motors to [B v] and [C v] :: movement move [straight: 0] for (2) [rotations v] :: movement
- Put the robot on the floor. Give it room!
- Find the start block.
- Add set movement motors. Check B and C.
- Add the move block with steering. Pick straight.
- Type 2.
- Press play. Watch it go!
Your challenges 5 min
⭐ Challenge 1: Drive back
Add a move backward block. Can it come home?
⭐⭐ Challenge 2: Stop at the line
Your teacher puts tape on the floor. Stop on the tape!
⭐⭐⭐ Challenge 3: Further and further
Try 1, then 2, then 3. Put a sticker where it stops each time.
Tidy up 5 min
- Turn the Brick off.
- Keep your Driving Base in one piece. You need it next time!
- Put spare parts back in the box.
Well done! You built the Driving Base!
Teacher note
Timing (90 min): model and talk 5, real world 5, build 35, break 5, parts 5, ports 5, connect 5, first drive 15, challenges 5, tidy 5.
The model, photo and manual are the Level 1 Driving Base (EV3-L01-01): two Large Motors, left wheel on B and right on C seen from behind, and a castor at the back. Check every castor spins freely; a stuck castor makes the robot curve.
New today is the move steering block, move [straight: 0] for … rotations. Show the class where the steering setting is on the block and how to pick straight before they build their own. Only straight today; turning is lesson 42.
Run it on the floor. Two rotations is a short drive (about 35 cm on the Level 1 page’s wheels).
Words met today: steering, straight, castor (the little wheel).
